TEDS技术在加速度传感器数据校正中的应用

提出一种利用传感器电子数据表格技术改善加速度传感器动态性能的办法。传感器标定时，其相关的特征参数被储存在传感器电子数据表格中；测试初始化时，每个传感器的特征参数被读入测试系统，指导系统自动完成其数学模型的建立，并在测试时进行实时数据校正。实验证明传感器电子数据表格技术的引入提高了加速度传感器的工作频带带宽和动态响应速度等动态性能指标。     

基于时间序列分析的火灾发生规律研究

在时间序列分析建模思想的基础上,基于全国2007年24小时火灾起数建立时间序列模型,对火灾发生趋势进行分析,并从预防控制时间上提出相应的防控建议。     

Casualty Rates of US Military Personnel During the Wars in Iraq and Afghanistan

Abstract

In Operation Iraqi Freedom, which ended in August 2010, nearly 3500 hostile deaths occurred among US military personnel and 32,000 more were wounded in action (WIA). More than 1800 hostile deaths occurred during Operation Enduring Freedom (in and around Afghanistan) through 2014 and about 20,000 were WIA. A larger proportion of wounded personnel survived in Iraq and Afghanistan than during the Vietnam War, but the increased survival rates were not as high as some studies have asserted. The survival rates were 90.2% in Iraq and 91.6% in Afghanistan, compared with 86.5% in Vietnam. The casualty rates varied between the conflicts in Iraq and Afghanistan and before, during, and after the respective surges. Amputation rates are difficult to measure consistently, but I estimate that 2.6% of all WIA and 9.0% of medically evacuated WIA from the Iraq and Afghanistan theaters combined resulted in the major loss of a limb. Elevated non-hostile death rates (including deaths due to accidents, illnesses, homicides, or suicides) resulted in about 220 more deaths in Iraq and about 200 more deaths in Afghanistan than would have been expected in peacetime among populations of the size deployed to those two conflicts.     

基于RCS序列的助推段弹道导弹识别

在弹道导弹的助推段,通过低分辨率雷达得到RCS序列作为识别的重要信息。由于运动特性和电磁散射特性的差异,弹道导弹在助推段的RCS序列与其他目标相比具有可识别性,但需要对其RCS序列进行处理。基于目标识别技术,详细阐述能从RCS序列中提取出的特征参数,并通过直方图、N点截图等方法给出了直观的反映。最后,将弹道导弹助推段特征与飞机、燃料舱等典型目标进行对比,得到可以作为识别参量的特征参数,并通过类内类间距离验证了有效性。     

Callable products for an implicit time model with dependent demands

Capacity providers such as airlines and hotels have traditionally increased revenues by practicing market segmentation and revenue management, enabling them to sell the same capacity pool to different consumers at different prices. Callable products can enhance profits and improve consumers' welfare by allowing the firm to broker capacity between consumers with different willingness to pay. A consumer who buys a callable product gives the capacity provider the right to recall capacity at a prespecified recall price. This article studies callable products in the context of the model most commonly used in industry, which handles time implicitly imposing fewer restrictions on the nature of randomness compared to the Poisson arrival process favored in academia. In the implicit time model, capacity providers set booking limits to protect capacity for future high-fare demand. Our numerical study identifies conditions where callable products result in significant gains in profits.     

使用等效偏移角稀疏测量的面阵相机序贯图像几何校正

天基光学相机实际在轨对地观测成像的畸变需通过几何校正抑制。目前主流面阵相机对地观测获得的小尺寸、高帧频序贯图像很难满足传统几何校正方法逐帧解算对单帧图像控制点数量与空域分布的要求且计算量巨大。针对这一问题,提出一种使用等效偏移角稀疏测量的面阵相机序贯观测图像几何校正方法,将逐帧校正参数解算问题转化为时域稀疏测量条件下等效偏移角信号恢复问题,利用等效偏移角信号时频信息可有效降低对单帧图像控制点数量和空域分布要求。通过高分四号卫星面阵相机在轨实测图像数据验证了所提方法的可行性且其能大大降低序贯图像几何校正处理的计算量。     

顾及噪声影响的GNSS高程序列预测Prophet方法

全球导航卫星系统(global navigation satellite system, GNSS)高程时间序列具有非平稳、非线性、含噪声等特点,在深入研究Prophet预测模型的基础上,针对Prophet预测模型对于趋势信号和周期信号有良好预测效果这一特性,提出一种引入经验模态分解(empirical mode decomposition, EMD)的“降噪—分解—预测”组合GNSS高程时间序列预测方法。该方法先将原始时间序列进行EMD降噪,再对降噪后的序列进行分解预测,最后重构各分量预测信号为最终预测序列。通过对实测高程数据进行研究,实验结果表明：降噪后信号的平均信噪比为10.30dB,能量百分比平均为88.75%;利用所构建的短期预测方法,GNSS高程时间序列预测结果的均方根误差分别平均提升26.41%和14.88%;平均百分比误差分别平均提升18.92%和7.91%,验证了组合预测方法的有效性及实用性。     

带内双频电磁辐射对频率步进连续波雷达的虚警干扰规律

为掌握带内双频电磁辐射对雷达的虚警干扰规律,以频率步进连续波雷达为研究对象,基于理论分析与效应试验,研究了虚警目标的电平变化规律、波形特征以及出现位置规律。结果表明:受试雷达在带内双频电磁辐射作用下,不考虑互调干扰时,至多产生两个位置随机的“山丘型”虚警目标,两者距离差与双频干扰频差有关。双频干扰中两分量互相压制,即当任一干扰分量强度恒定时,随着另一个分量的增强,前者形成的虚警目标电平缓慢下降,最终降速基本恒定,而后者形成虚警目标电平逐渐升高,直至电平恒定;若双频干扰信号两分量同比例增强,则两个虚警目标电平均在初期近似线性上升,而后增速逐渐降低至零。     

A dual criteria sequencing problem with earliness and tardiness penalties

We consider the problem of sequencing n jobs on a single machine, with each job having a processing time and a common due date. The common due date is assumed to be so large that all jobs can complete by the due date. It is known that there is an O(n log n)‐time algorithm for finding a schedule with minimum total earliness and tardiness. In this article, we consider finding a schedule with dual criteria. The primary goal is to minimize the total earliness and tardiness. The secondary goals are to minimize: (1) the maximum earliness and tardiness; (2) the sum of the maximum of the squares of earliness and tardiness; (3) the sum of the squares of earliness and tardiness. For the first two criteria, we show that the problems are NP‐hard and we give a fully polynomial time approximation scheme for both of them. For the last two criteria, we show that the ratio of the worst schedule versus the best schedule is no more than . © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 422–431, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10020     

盲自适应的多用户CDMA阵列接收机

研究了基于CMOE准则的空时多用户检测及其自适应实现。这是一种盲方法 ,不要求任何训练序列 ,能够抑制多址干扰 ,解决远近效应问题。进一步 ,分析了多用户CDMA阵列接收机的性能 ,并且与多用户单天线接收机、单用户阵列接收机以及单用户单天线接收机进行了比较。